Dimmable Driver 60W 24VDC IP65 Designlight

Description

Driver compatible with most dimmers on the market. In addition to Triac and PWM dimmers, it is possible to connect you to 0-10V or 1-10V control. The driver is excellent for regulating the brightness of LED lighting that requires 24V direct current and can be loaded with up to 60W. Examples of light sources that can be connected are LED strips for 24VDC where the driver provides dimmable lighting without flickering. The drive has IP rating 65 and can be mounted both outdoors and indoors.

Connection takes place via approximately 19 cm of articulated cable (1mm²) on the primary side of the drive. Outgoing cable is a 2-conductor, 1mm² and approximately 19 cm long. The signal control cable (used for 0-10 or 1-10V control) consists of 2 conductors, 0.75mm² and is approximately 19 cm long.

Note: Some light sources contain non-dimmable components and are therefore not intended for dimming.

Technical Information

• Dimming function/Control: Phase dimming (front edge)
• Protection class : IP65
• Dimmable : Yes
• Connection: 230VAC
• Type of drive: 24VDC Constant voltage
• Minimum load: 1W
• Max load: 60W
• Width: 37 mm
• Height: 27 mm
• Length: 190 mm