Hot Water Dispenser Tappman Nibe

Description

Nibe Tappman is a heat exchanger package containing a charging pump, flow switch, stainless steel heat exchanger and dirt filter. It is intended to be connected to an existing water-based heat source for the production of domestic hot water. When hot water is drawn off, the flow switch starts the built-in charging pump. When hot water is drawn off, the charging pump is automatically stopped again, whereby the flow through the exchanger ceases. The hot water circuit must be equipped with a mixing valve to avoid scalding, but does not need to be equipped with a safety valve since the volume of the heat exchanger is less than 2 liters. The design is approved for a maximum operating pressure of 10 bar (1.0 MPa). The water volume is 1.5 liters. The weight of the water dispenser is 12 kg.

Nibe Tappman can be mounted hanging on the boiler or wall. Nibe Tappman's two suspension holes are located on the back of Nibe Tappman. NIBE TAPPMAN can be connected to a boiler and must then be connected to the boiler's hot water outlet. The water dispenser is connected to 230 V ~ 1-phase.

Technical Information

• Max. temperature: 85 °C
• Rated power: 45 kW
• Connection voltage: 230 V
• 3-way control valve: No
• Return connection: Pipe end
• Connection cold tap water: Pipe end
• Connection hot tap water: Pipe end
• Connection supply: Pipe end
• Charge pump (heating): No
• Legionella protection: No
• Material quality: Acid-resistant steel 316 (1.4401)
• Max. working pressure: 10 bar
• Control equipment: No
• Drinking water pump: Yes
• External pipe diameter return: 22 mm
• External pipe diameter cold tap water: 22 mm
• External pipe diameter hot tap water: 22 mm
• External pipe diameter supply: 22 mm
• Heat exchanger with double separation: Yes

Specifications

• Heat exchanger material: Stainless steel
• Volume: 1.5 liters
• Width: 415 mm
• Depth: 140 mm
• Height: 305 mm