Underfloor Heating Ebeco Cable Kit 200 200W
Watch this product and we will notify you once it is back in stock.
Underfloor Heating Ebeco Cable Kit 200 200W
Description
Cable Kit is a complete, durable and reliable underfloor heating system with a thin, high-quality heating cable. Approved for installation directly on combustible material. The system is primarily intended for heating tiles and natural stone floors, but can also be installed under wood, laminate and plastic carpet. 12-year warranty on the entire kit, including thermostat. The warranty covers 100% of the costs in the event of any damage. The heating cable is thin and only 4 mm thick. It is flexible and easily bendable, which simplifies installation. The cable is fixed with tape or glue sticks included in the package. The underfloor heating can be installed on top of existing floor structures such as concrete, plaster or chipboard. The cable is then installed in a thin layer of filler; tiles/natural stone 5 mm, wooden floor 8 mm, laminate 10 mm, plastic mat 15 mm. It is also possible to install it in wooden subfloors. Maximum output as follows: On concrete substrate 160 W/m², on combustible substrate 120 W/m², in wooden subfloors 80 W/m², under wooden/laminate flooring and plastic mat 75 W/m². In conservatories, 140-160 W/m² is recommended. The system must be connected to 230 V via a 30 mA earth leakage circuit breaker. The heating cable must not be crossed or cut! The 2.5 m cold cable may be cut. The lowest installation temperature when attaching with tape is +18°C. At lower floor temperatures, the adhesiveness of the tape decreases. Filler should be applied as soon as possible after installation. If filling is applied later, press the tape in place once more before filling. The cable has a maximum installation temperature of -5°C. Cable Kit 200 consists of cable on drum, practical drum holder, thermostat EB-Therm 205 (front in Schneider Electric Exxact series), spiral hose, fixing tape, glue sticks. The thermostat EB-Therm 205 is equipped with fuzzy technology that provides more even temperature and lower energy consumption. The thermostat has three temperature control functions; room thermostat, floor thermostat or a combination of both. There is an adjustable overheating protection that makes it suitable for, for example, wooden floors, which must not get warmer than 27°C. EB-Therm 205 has two energy saving programs. Choose between Home environment (reduction by 5°C Mon-Fri 08:30-15:00, Mon-Sun 23:00-05:00) and Office environment (reduction by 5°C at all times except Mon-Fri 06:00-18:00). The thermostat is supplied with a front from the Schneider Electric Exxact series but is also suitable for series such as Schneider Electric Trend, Elko RS, Elko Plus, Strömfors, Gira, Merten and Jussi. Intended for flush or surface mounting. For surface mounting, use the extension frame 7330778816088. IP21.
Technical Information
- Length: 18.5 m
- Power: 200 W
- Heating power: 200 W
- Area at 120 W/m² c/c 9 cm: 1.7 m²
- Area at 100 W/m² c/c 11 cm: 2 m²
- Area at 75 W/m² c/c 15 cm: 2.7 m²
- Connection voltage: 230 V
- Minimum bending radius: 25 mm
- Supplier article number: 8960851
- Cable type: 2-core with screen
- Substrate: Concrete, plaster/chipboard, wooden joists
- Cold lead length: 2.5 m
- Possible installed power: 75-120 W/m²
- Approved according to: CE