Valve Part Fresh Internal TL100DE

Description

Valve part internal TL100D Energy FreshTL-DE Series. Internal valve part for replacement of old valves. For wall mounting, intended for continuous ventilation of homes. The valve has a strong condensation insulation and filter. The storm fuse, which is an over-ventilation protection, prevents energy loss in the event of wind. The amount of air is regulated with the front, which has a mechanism for changing the opening angle. Delivered without grommet and grille. Hole punch 105mm.

General: Wall valve with a very discreet design. The front can be wallpapered and painted over. The valve is equipped with strong condensation insulation, over-ventilation protection, storm protection and filter. The storm fuse prevents energy loss in the event of wind. The flow is regulated with the front, which has a mechanism for changing the opening angle. The front opens at the top and forces the air upwards, which gives a comfortable distribution pattern even with underfloor heating.

Internal valve part: The internal valve part has a strong condensation insulation, filter and a front that is angled upwards to set the flow. The filter is mounted in a filter cassette, which is also equipped with a protection against possible inflow of water. The front has four opening positions for varying the flow. The diffusion pattern is carefully developed to suit underfloor heating systems, the valve releases the air upwards and to the sides. The mixing of room air is very effective, already a few decimeters from the device, strongly cooled air has reached a comfortable temperature.

Assembly/location: The valve should be placed high up on the wall, if there is a radiator, you should aim for a location above it. With such placement, the convection current is utilized and the best comfort is achieved. The valve is excellent for use with underfloor heating as it is designed for this.

Handling/maintenance: To ensure good air quality and maintained flow, the filter should be cleaned/changed 1-2 times/year. The standard filter is washable, use mild soap solution. Pollen and environmental filters are replaced with new ones. The filter is mounted in a filter cassette behind the front, which is easily dismantled by freeing the front from the lower fixings and then lifting it up. The filter cassette straight out from the valve chassis.

Accessories: The valve comes with a complete range of accessories for additional flexibility.

Specifications

• Surface: Matt
• Color: White
• Material: Plastic
• Plastic material specification: ABS