Byggbeslag & vinkelbeslag

Angle Black 2x50x50x35mm, Joma 4820004

Mainly used as a cross connection in wood. The fitting is intended for smaller loads.

700325283

30 kr / pc.

Stock status: Lev. normalt inom ca 1 till 5 vardagar

Angle Bracket 105x105x90x2.5mm Fast 833167

ABY angles are mainly used for cross joints in wood, e.g. between rafters and hammer ties, when anchoring roof ridges to load-bearing beams as well as

006810663

29 kr / pc.

Stock status: Lev. normalt inom ca 1 till 5 vardagar

Angle Bracket 164x80x4.0x60mm Fast 833171

Angle fitting ABO FAST CC Used as a cross connection in wood, Can also be advantageously used as a connection between sill and wall stud

006810667

63 kr / pc.

Stock status: Lev. normalt inom ca 1 till 5 vardagar

Angle Bracket 7357, TS73, 225x65mm, Silver, Dorma

For upside-down mounting of door closers on the stop side with deep frames

004405133

666 kr / pc.

841 kr / pc.

Save 21 %

Stock status: Lev. normalt inom ca 2 till 5 vardagar

Angle Bracket ABNR, CC, 285X90X4,0X65mm, 8pcs, Fast 833183

ABNR angles with edge rib reinforcement can handle high upward loads but are also strong in other load directions.

006810674

1 048 kr / pc.

Stock status: Lev. normalt inom ca 2 till 5 vardagar

Angle Bracket ABXR Stainless A4, 90x90x2.5x65mm

ABXR angles are reinforced and are mainly used for cross joints in wood, e.g. between truss and hammer strap or when anchoring roof ridges

006810655

93 kr / pc.

Stock status: Lev. normalt inom ca 1 till 5 vardagar

Angle Bracket VBK 95x50x5x30mm

Material: Hot-dip galvanized sheet steel, Fastening must be done with French screws, diameter 8 mm, hot-dip galvanized, material thickness is 5 mm

006810676

38 kr / pc.

Stock status: Lev. normalt inom ca 1 till 5 vardagar

Angle Bracket VBK 95x95x5.0x30mm

Angle iron ABK is used as a cross connection in smaller wooden constructions such as for example tool sheds, planks, Wood screws 8.0 mm are used for f

006810677

42 kr / pc.