Beam Shoe 45x96mm, Fast 833246

Description

Beam shoe JH is used when connecting beams in the same plane and when connecting columns and beams. It is recommended to use a beam shoe with a height corresponding to at least 2/3 of the height of the secondary beam. For fixing in wood, use CNA 4.0 anchor nails or CSA 5.0 mounting screws. This beam shoe is provided with bolt holes with a diameter of 9 or 11 mm for mounting on concrete, steel or masonry. BSN beam shoes are also supplied in stainless acid-resistant steel. CNA 4.0 anchor nail stainless or CSA 5.0 fitting screw stainless is used for fixing the stainless steel beam shoes. Show less, Min 20 mm from upper edge of beam to nail hole. Fitting width may exceed beam width by a maximum of 3 mm. The joist shoe is equipped with both nail and bolt holes and can be installed in wood, concrete, lightweight concrete, brick or steel. 45x137 and 48x136 are also available in stainless steel. Anchor nails 4.0 or anchor screws 4.8 are used for fastening. M8 or M10 bolts are used for the bolt holes.

Specifications

• Material: Hot-dip galvanized sheet steel S250GD+z275.
• Nail hole: Ø 5.0 mm
• Bolt hole: Ø 9.0 mm, Ø 11.0 mm
• Dimension WxHxD: 45x96x2.0 mm