Butyl Tape Fiber ME404, 75mm, Grey, 4pcs, Illbruck
Watch this product and we will notify you once it is back in stock.
Butyl Tape Fiber ME404, 75mm, Grey, 4pcs, Illbruck
Description
Butyl tape Fiber consists of a high-quality plastoelastic butyl rubber mass coated on one side of a non-woven fabric. The tape is very dimensionally stable in its length and does not stretch. On the other hand, the band can handle a movement absorption of up to 10%.
Preparation
The surfaces must be dry and free from dust, oil, grease and other substances that can impair adhesion. Rough and porous surfaces or where the temperature is below + 5ºC can in some cases be primed.
Application
Cut the tape to the required length / shape and with a calculated overlap of at least 25 mm. Press the tape carefully and with even pressure over the entire surface or, best of all, roll it with the help of a pressure roller (fig 1). NOTE The band must not be stretched or punctured. Check that no air pockets have formed. When installing ME404 as a secondary seal under windows, the tape must not go completely around / past multifunctional tapes such as Trio or bottom strip/joint.
Restrictions
Can't withstand UV light, the tape must always be covered outdoors with plaster or sheet metal fittings. V.g. check compatibility in contact with other sealants.