Duct Fan TF100 Fresh

Description

Demountable duct fan of axial model with straight air flow. The demountability of the fan chassis makes it possible to easily clean the inside of the duct. The fan is intended for supply or extract air ventilation and can be mounted vertically or horizontally. ATTENTION! The fan must not be used as a flue gas fan or in an explosive environment, the incoming air must not exceed a temperature of +40 degrees C.

Mounting: The fan can be mounted horizontally or vertically in a duct. Screw the fan to a wooden rule or other suitable structure. It is recommended that a minimum duct length of approx. 1 m precedes the fan, i.e. on the "suction side" and in the case of vertical installation, it is important that the duct opening is fitted with a grate or similar that prevents loose particles and water from entering the fan motor. Connect channel on one or both sides depending on use. Make sure the assembly is stable.

Maintenance: The fan should be cleaned once a year for optimal function. Before cleaning, the fan must be de-energized, by loosening the two clamps on one side of the fan, cleaning is facilitated. The fan can then be cleaned with a damp cloth or similar.

Environment and recycling: The product is marked with the WEEE symbol, which shows that it must not be thrown away with household waste, but must be recycled at a suitable recycling point in the respective municipality. Fresh AB is connected to Sweden's country-wide system for recycling, according to the European WEEE directive.

Specifications

• Surface: Glossy
• Color: White
• Material: Plastic
• Number of years warranty: 3 years

Technical information

• Placement of product (installation): Inside duct
• Max pressure: 200 Pa
• Voltage 5v -400V:
• 230V AC
• Power supply phase: 1-phase
• Insulation class: II (must not be protective earthed)
• Type of motor: AC
• Protection class (IP): IP 44