Esylux Presence Detector CE360I 8m Wago 230V IP40
Watch this product and we will notify you once it is back in stock.
Esylux Presence Detector CE360I 8m Wago 230V IP40
Description
Presence detector with 360° monitoring area for recessed ceiling mounting. Range of up to 8 m in diameter for use in small spaces and passageways with daylight entry 1.5 m prefabricated WAGO cable 16 A high-power relay (tungsten contact), especially good for switching on/off capacitive loads such as e.g. EL-FDs, parallel-compensated fluorescent tubes, compact fluorescent tubes, energy-saving lamps. Automatic lighting control based on presence and daylight. Programmable with remote control, e.g. permanent light ON/OFF and automatic reading of the current light value. Factory-set operating program for immediate commissioning. Extra button input for individual, manual switching on/off of the lighting. The detector can be used in fully or semi-automatic operation. Extension of the surveillance area with the connection of a slave presence detector. Built-in impulse function for controlling stair automats or signal units and use with building technology/memory controllers.
Technical Information
- Model/Version: Presence detector
- Sensor type: Passive infrared
- With DALI interface: No
- Constant light control: No
- HVAC control: No
- Number of switching zones: 1
- Anti-bacterial: No
- Detection angle horizontal from/to: 180 - 360 °
- Diameter range on floor: 8 m
- Dimmer function with dimmer basic element: No
- Remote controlled: Yes
- For capacitive load: Yes
- Bypass Switch: Yes
- Forced disconnection: Yes
- Forced power on: Yes
- Switch-off delay: 300 s
- Frequency range: 50 - 50 Hz
- Diameter (built-in dimensions): 68 mm
- Installation depth: 67 mm
- Halogen-free: Yes
- Adjustable light value: Yes
- Max. connection time: 30 min
- Max. presence area: 12.58 m²
- Max. switching power: 2300 W
- Max. forward range: 3 m
- Max. lateral reach: 4 m
- Max. starting current: 800 A
- Max. switching power LED: 600 W
- With signal unit: Yes
- With IFTTT support: No
- My. switch-on time: 60 s
- Minimum depth of recessed installation box: 67 mm
- Mounting method: Recessed mounting
- Nominal voltage: 230 V
- Inverter input: Yes
- Optimal mounting height: 3 m
- Scanning angle: 360 °
- Voltage type: AC
- Response value adjustable sensitivity: Yes
- Response value luminosity: 5 - 2000 lx
- Teach function for response value luminosity: Yes
- Protection class (IP): IP40
Specifications
- Material: Plastic
- Material quality: Thermoplastic
- Height: 24 mm
- Depth: 24 mm
- Diameter: 82 mm