Grundfos Pump Package SP1A-21 90m Cable

Description

Submersible multistage pump for water supply to households, irrigation in greenhouses and agriculture, raw water supply, groundwater lowering and in industrial plants. The pump is intended for use in clean cold water. The entire deep well pump is made of stainless steel and is suitable for both horizontal and vertical installation. The pump is equipped with a gentle pump and built-in non-return valve. The motor has sand protection, water-lubricated bearings and a diaphragm for pressure equalization. Minimum borehole diameter: 104 mm. Calculated flow: 1 m³/hour. Speed: 2900 rpm. IP58. The pump is supplied with cable 4x1.5 mm², rubber clamp, 2.3 mm stainless wire, 2 wire locks and contactor motor protection.

The pump is dimensioned for a normal-sized villa. Choose a pump using the cable length, where the cable should be at least as long as the well depth. When installing, the pump should hang at least 5 meters from the well bottom and the cable should end in a drill top or other waterproof electrical connection.

Do not forget to clamp the hose and cable together. NOTE! The cable should be slightly longer than the hose because the hose stretches a little when lifting the pump.

Specifications

• Rated current: 2.2 A
• Flow: 1000 l/h
• Motor power: 550 W
• Speed: 2900 Rpm
• Rated supply voltage: 3 x 400 V
• Material quality housing/enclosure/frame: Stainless steel
• Height: 837 mm
• Width: 101 mm
• Pump diameter: 101 mm
• Pump and motor length: 837 mm
• Length of connection cable: 90 m